Ozone Generator Technical Specifications

Ozone Generators

Technical Specifications

PCOP - Pressure Compensated Ozone Production

All Ozmotics Ozone Generators come with a Pressure Compensated Ozone Production system enabled. Under normal operating conditions, if pressure changes occur within a specified range (typically 5-20 psig, 40-60 psig or 70-85 psig) the PCOP system will automatically adjust the power to an ozone cell to maintain an uninterrupted output of ozone production.

This feature provides additional flexibility and reliability to Ozmotics Ozone Generators in various customer applications where steady laboratory quality oxygen supply can not be reasonably achieved.

Please Note:  We have a variety of Custom Build Models up to 500 g/h which are made exactly to match customer application and specifications, contact us for more information.

Ozone Output Specifications:  (ranges cover minimum - maximum)

  • Ozone Output: 3 - 30 g/hr 
  • Gas Flow Rate: 0.1 - 10 slpm
  • Concentration (% ozone by weight): 5 - 12%
  • Working Pressure: 20 psig 
    Note: If you would like a different pressure range let us know and we can tune the unit for your specific need.

Power Requirements:

  • Domestic: 115 VAC, 60 Hz, 5.0 A (15 Amp Service)
  • International: 230 VAC, 50 Hz, 2.5 A (10 Amp Service)

Material and Construction:

  • Enclosure: Brushed Stainless Steel
  • High Precision Machined Ozone Generator Cell tested at 150 PSIG for leaks
  • O2/O3 Gas Tubing: PTFE/304 Stainless Steel

Installation and Feed Connection Requirements:

  • Oxygen Inlet: 0.25" Swagelok
  • Ozone Gas Piping Outlet: 0.25" Swagelok
  • Electrical Power: 110 - 120 VAC, 1-Phase, 50/60 Hz, 4 Amps Full Load
  • Enclosure Dimensions:
    • Height: 14"
    • Width: 14"
    • Depth: 5.75"
  • Approximate Weight: 30 lbs
  • Control Input / Output


  • Remote Enable: Dry Contact Close to run
  • Remote Control: 4 - 20 mA or 0-10 V (0 - 100% Output) optional


  • Normal Operation: Green LED "ON" , Red LED "OFF"
  • Alarm, Not Normal Operation: Green LED "ON", Red Led "ON" Less than 70% Production Capacity
  • Alarm, Not in Operation: Green LED "OFF", Red LED "ON"
  • Local Display: Red LED Ozone Output Level Display